Teltonika RUTX09 4G Router

£239.00 Excl VAT

Teltonika RUTX09 is the new generation of high speed 4G routers with options for embedded CAT6 LTE 4G modem and also features Gigabit Ethernet for high speed networking.

Out of stock

Description

The RUTX09 is the new powerful LTE routerfrom teltonika and is designed as a Main/Backup Internet source where steady connection and high data throughput is required. Equipped with Dual-SIM and 4 x Gigabit Ethernet ports. the Teltonika RUTX09 has all advanced RutOS software and security features.

RUTX09 Features

MOBILE

    Mobile module 4G (LTE) – Cat 6 up to 300 Mbps, 3G – Up to 42 Mbps
    SIM switch 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
    Status Signal strength, SINR, RSRP, RSRQ, Bytes sent/received
    Bridge Direct connection (bridge) between mobile ISP and device on LAN
    SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
    Black/White list Operator black/white list
    Multiple PDN Possibility to use different PDNs for multiple network access and services
    Band management Band lock, Used band status display

    ETHERNET

WAN 1 x WAN (can be configured to LAN) 10/100/1000 Mbps, comply IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
LAN 3 x LAN ports, 10/100/1000 Mbps, comply IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

NETWORK

    Routing Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2)
    Network protocols TCP, UDP, IPv4, IPv6, ICMP, UDP, NTP, DNS, HTTP, FTP, SMTP, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP
    VoIP passthrough support H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
    Connection monitoring Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection
    Firewall Port forward, traffic rules, custom rules
    DHCP Static and dynamic IP allocation, DHCP Relayd
    QoS Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
    DDNS Supported >25 service providers, others can be configured manually
    Network backup VRRP, Mobile and Wired WAN options, each of which can be used as backup, using automatic Failover
    Load balancing Balance your internet traffic over multiple WAN connections
    SSHFS (optional) Possibility to mount remote file system via SSH protocol (not available in standard FW)

    MONITORING & MANAGEMENT

      WEB UI HTTP, status, configuration, FW update, CLI ,troubleshoot, event log, system log, kernel log
      FOTA Firmware update from server, automatic notification.
      SSH SSH (v1, v2)
      SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET
      TR-069 OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVsystems
      SNMP SNMP (v1, v2, v3), SNMP trap
      JSON-RPC Management API over HTTP
      MODBUS MODBUS TCP status/control
      RMS Teltonika Remote Management System (RMS)

      SYSTEM CHARACTERISTICS

    CPU Quad-core ARM Cortex A7, 717MHz
    RAM 256MB, DDR2
    FLASH memory 256MB SPI Flash

    FIRMWARE / CONFIGURATION

      WEB UI Update FW from file, check FW on server, configuration profiles, configuration backup
      FOTA Update FW/configuration from server
      RMS Update FW/configuration for multiple devices
      Keep settings Update FW without losing current configuration

      FIRMWARE CUSTOMIZATION

    Operating system RutOS (OpenWrt based Linux OS)
    Supported languages Busybox shell, Lua, C, C++
    Development tools SDK package with built environment provided

    LOCATION TRACKING

GNSS GPS, GLONASS, BeiDou, Galileo and QZSS
Coordinates GNSS coordinates via WebUI, SMS, TAVL, RMS
NMEA NMEA 0183
Server software supported server software TAVL, RMS
Mobile Network Geolocation Location without using GPS, get approximate location based on mobile tower on RMS
Geofencing Configurable multiple geofence zones

INPUT/OUTPUT

    Input 1 x Digital Input (Non-isolated, Logic low 0…+5V, Logic high +8…+40V)
    Output 1 x Digital Output (open collector type, 30V@0.3A)
    Events SMS, EMAIL, RMS

    USB

Data rate USB 2.0
Applications Samba share, custom scripts
External devices Possibility to connect external HDD, flash drive, additional modem, printer
Storage formats FAT, FAT32, NTFS

POWER

    Connector 4 pin industrial DC power socket
    Input voltage range 9 – 50 VDC, reverse polarity protection, voltage surge/transient protection
    PoE (passive) Passive PoE. Possibility to power up through LAN port, not compatible with IEEE 802.3af and 802.3at standards
    Power consumption 11W Max.

    PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM)

Ethernet 4 x RJ45 ports, 10/100/1000 Mbps
Status LEDs 3 x connection status LEDs, 5x connection strength LEDs, 8x LAN status LEDs, 3x WAN status LEDs, 1x Power LED
SIM 2 x SIM slots (Mini SIM – 2FF), 1.8V/3V
Power 4 pin industrial DC power socket
Antennas 2 x SMA for LTE, 1 x SMA for GNNS
USB USB A socket for external devices
Reset Reset/restore to default button

PHYSICAL SPECIFICATION

    Casing material Full aluminium housing
    Dimensions 115 mm x 95 mm x 44 mm (H x W x D)
    Weight 456g
    Mounting options DIN rail (can be mounted on two sides), flat surface placement

    OPERATING ENVIRONMENT

Operating temperature -40 C to 75 C
Operating humidity 10% to 90% non-condensing
Ingress Protection Rating IP30

Reviews

There are no reviews yet.

Be the first to review “Teltonika RUTX09 4G Router”

Your email address will not be published. Required fields are marked *

0